Medical Series

Insulation Monitoring Devices are designed to monitor the insulation resistance levels of IT systems in AC/DC networks. With the AMP Plus measuring principle, insulation faults of rectifiers, converters, thyristor-controlled DC drives and DC component power supplies as well as standard loads are detected.

In addition to its measurement features, it works integrated with all automatic control systems with serial communication options and protocol converters (Profibus, ModBus, Ethernet).

LAP 70 Local Alarm Panel indicates alarms like insulation fault, overcurrent, transformer over temperature visually and audibly that are detected by the IMD 30 insulation monitoring device and stores each event with their timestamp.

Standards

• IEC 60364-7-710

Advantages

• Up to 32 supported insulation fault monitoring device
• It can store up to 150 event records thanks to its internal clock
• Remote insulation test and fault contact outputs

Applications Areas

• Operating rooms
• Intensive care rooms

RAI 70 Remote Alarm Indicator monitors all alarms and events of the whole Isolated Power System and displays them on its LCD and LEDs as well as creating audible alarms.

Standards

• IEC 60364-7-710

Advantages

• Remotely monitor all alarm information detected by the Isolated power system
• Up to 32 supported insulation fault monitoring device
• Remote insulation test and fault contact outputs

Applications Areas

• Operating rooms
• Intensive care rooms

CTS 30 Changeover Module is the equipment that enables to select the convenient one between two different sources feeding the isolated power panel and transfer it to the output.

Standards

• IEC 60947-6-1
• IEC 60364-7-710

Advantages

• Transfer Time: 40 ms
• Communicates with the Remote Alarm Indicator and the Local Alarm Panel with the Modbus RTU protocol.

Applications Areas

• Operating rooms
• Intensive care rooms

EDS 30 Insulation Fault Location device is designed to detect the location of insulation fault in IT systems. The fault location device EDS 30 communicates with the Insulation Monitoring Device (IMD30) with the ModBus RTU protocol and determines which line the fault originates from in a very short time. It continuously scans its 6 current transformers and if a leakage is detected the alarm LED of the faulty channel lights up. Alarm details are displayed on the Local Alarm Panel and the Remote Alarm Indicator.

Standards

• IEC 61557-8
• IEC 60364-7-710

Advantages

• Elegant designed to detect the location of insulation fault in IT systems.
• Number of channels: 6
• Remote insulation test and fault contact outputs

Applications Areas

• Operating rooms
• Intensive care rooms

Insulation Monitoring devices are one of the most important equipment of IT Systems. It detects insulation fault in the system by constantly checking the insulation resistance level between phases and earth. At the same time, it controls the load current and the temperature of the isolation transformer in accordance with the IEC 60364-7-710 standard and ensures that the warning system is started when it reaches critical values.

Standards

• IEC 61557-9
• IEC 61557-8
• IEC 60364-7-710

Advantages

• High measurement resolution
• Low measurement uncertainty
• Wide measurement range

Applications Areas

• Operating rooms
• Intensive care rooms